Materials & Maintenance

SimTek vs. Fence Trac: Which Specialty Fence Fits Your Utah Yard?

Compare SimTek and Fence Trac fence systems for Utah yards. Learn how each handles wind, traffic noise, rocky bench soil, and seasonal maintenance.

Why Utah Homeowners Choose Specialty Fence Systems Over Vinyl

Standard vinyl privacy fencing handles the basics for most residential yards along the Wasatch Front and Utah Valley. It outlines property boundaries, secures pets, and eliminates painting. However, standard vinyl can fall short when a backyard borders a noisy road, faces relentless canyon winds on the mountain benches, or requires an architectural aesthetic to match modern home exterior designs.

SimTek and Fence Trac solve these site challenges in distinct ways. SimTek provides a dense, stone-look composite wall that blocks line-of-sight sound and shrugs off heavy impacts without requiring a continuous masonry footing. Fence Trac pairs black powder-coated structural steel channels with tongue-and-groove wood, composite, or metal infill to deliver clean horizontal lines that will not sag, twist, or rot. Both systems offer premium durability, but each addresses different property priorities.

Before digging for either system, verify boundary lines using recorded property pins, check municipal fence height and setback ordinances, and call 811 for Blue Stakes utility marking. Because both fence types require heavier components than standard vinyl, setting deep, stable post footings in rocky bench soils is critical from day one.

SimTek Fencing: Best for Noise Reduction, Privacy, and Stone Aesthetics

SimTek panels are manufactured from rotationally molded polyethylene reinforced with internal galvanized steel channels. The exterior profile replicates the look of natural granite or chiseled fieldstone, finished symmetrically on both sides so that both neighbors see an identical, finished surface.

Because SimTek panels are solid and mass-heavy rather than hollow extrusions, they function effectively as an acoustic sound dampener. While no residential fence will silence an interstate highway, SimTek noticeably cuts down direct line-of-sight noise from busy cross streets, delivery vans, neighborhood parks, and barking dogs. For homes bordering collector streets or commercial parking lots, that physical mass creates a more peaceful outdoor living area.

Impact resilience is another major benefit. Polyethylene resists impact from stray baseballs, lawn mower debris, and severe hail without cracking or denting. That same solid surface, however, acts as a sail in heavy windstorms. On wind-exposed bench properties, installers cannot cut corners on post holes. Holes must be drilled deep past the frost line into solid subsoil, anchored with substantial concrete collars. Gates also require welded internal frames and heavy-duty adjustable hinges to avoid latch misalignment over time.

Fence Trac Systems: Best for Modern Horizontal Lines and Long-Lasting Wood

Fence Trac solves the fundamental structural flaw of traditional wood fencing: warped 2x4 stringers, twisted pickets, and rotted 4x4 posts. It accomplishes this by separating the fence into an engineered steel skeleton and interchangeable infill boards.

The framework consists of heavy-gauge steel posts and horizontal U-channels coated with exterior-grade powder coat. Tongue-and-groove cedar, horizontal composite boards, or corrugated metal panels slide directly into the tracks. The steel channels clamp the board ends flat, preventing bowing and cupping while leaving enough interior clearance for natural expansion and contraction through seasonal weather swings.

Installation requires exact post placement. With conventional wood framing, an installer can adjust picket placement if post spacing varies by an inch. With Fence Trac, post centers must match the manufactured rail lengths down to the fraction of an inch. If a post is slightly out of plumb or spaced unevenly, the steel tracks will not seat properly. Installers must also inspect underground irrigation lines beforehand so sprinkler spray does not soak natural wood infill daily.

How SimTek and Fence Trac Hold Up in Utah Winters and High Winds

Utah environments test exterior materials with intense summer UV exposure, low humidity, sub-zero winter temperatures, and heavy mountain snow loads. Both systems stand up to these conditions, but their upkeep needs reflect their construction materials.

SimTek requires virtually zero maintenance after installation. Polyethylene maintains flexibility in sub-zero weather without turning brittle, and built-in UV stabilizers prevent fading, chalking, or flaking. Hard-water sprinkler deposits and trail dust rinse off easily with a hose or light pressure washer.

Fence Trac maintenance depends entirely on the infill material you install. The steel frame needs little more than an occasional water rinse. If you choose natural western red cedar infill, expect to apply a quality penetrating exterior stain every few seasons to protect the grain from Utah's dry air and intense sun. If you select horizontal composite tongue-and-groove boards, long-term maintenance drops down to routine washing.

For both systems, subsoil conditions govern long-term structural success. Setting posts in rocky Wasatch bench ground or heavy Utah Valley clay requires dedicated hydraulic augers and rock bars to reach specified depths. Cheating post depth to avoid digging rocks leads to frost-heaved posts and shifted panels after winter freezes.

How to Choose Between SimTek and Fence Trac for Your Yard

Selecting the right system depends on your yard's specific layout, style, and environmental exposure.

SimTek is the better fit if:

  • You want to dampen traffic, park, or sidewalk noise along an exposed property edge.
  • You want the heavy visual presence of a masonry or stone wall without pouring expensive concrete foundations.
  • Your yard sees active family recreation where panels need to resist balls, toys, and accidental impacts.
  • You want a completely maintenance-free fence that never requires staining, sealing, or painting.

Fence Trac is the better fit if:

  • Your home features modern, industrial, or mountain-contemporary architecture that calls for horizontal lines.
  • You love the warmth of authentic cedar or redwood but do not want warped rails or sagging gate frames.
  • You want a distinct design profile that sets your home apart from standard neighborhood vinyl.
  • You want the flexibility to replace individual infill boards over time without disturbing the structural posts.

To explore options and compare specialty fence solutions for your property, request a free fence quote at dfndrfencing.com/quote or text DFNDR at 801-709-3309.

Common questions

Does SimTek actually help reduce traffic and neighborhood noise?

Yes. Because SimTek panels are solid, dense composite material rather than hollow vinyl profiles, they block direct line-of-sight sound waves. They will not completely eliminate highway roar, but they noticeably dampen street noise, barking dogs, and adjacent commercial activity.

Can I use natural wood inside a Fence Trac frame?

Yes. Tongue-and-groove cedar or redwood is one of the most common infill choices for Fence Trac. The powder-coated steel channels keep the boards aligned and flat, preventing the twisting and sagging typical of wood-framed fences while still letting the lumber expand and contract.

How do SimTek and Fence Trac handle high Utah canyon winds?

Both systems resist heavy winds when installed with deep, concrete-anchored footings below the local frost line. SimTek panels act as a solid barrier and require reinforced posts, while Fence Trac relies on its rigid steel frame to hold horizontal infill firmly against crosswinds.

Ready to Get Started?

Whether you just moved into a new build, need to replace a tired wood fence, or are dealing with hail or wind damage, DFNDR makes your fence project simple and fully managed.

No stress. No confusion. Just a clear path to a fence built right.

Text Us